Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Rutland · England

Wall tie replacement in Rutland

Wall tie replacement in Rutland starts with the ground. Parts of Rutland have clay that can shrink near trees in dry spells, and the buildings here are mostly limestone and ironstone cottages and town houses, so the repair has to suit both.

Guide price from£1,750per house inc VAT

Drilling a mortar joint for a remedial wall tie on a 1960s cavity wall
Area
Rutland
Pricing region
East Midlands
Ground
Clay in parts
Towns listed
2

What is the ground like in Rutland?

Rutland is Lias clay and Jurassic limestone and ironstone, with clay soils in the valleys that can move near trees.

Ground movement here is more often linked to soils, drains and trees than to mining. Across Rutland, most homes are limestone and ironstone cottages and town houses, with post-war estates around Oakham and Uppingham.

Signs you may need wall tie replacement

  • A house built before the 1980s on an exposed or coastal site
  • The roof edge or verge lifting slightly above the brickwork
  • Mortar joints that look wider or opened up on one elevation
  • Horizontal cracks along mortar joints, repeating every few brick courses

How much will wall tie replacement cost in Rutland?

These are guide prices for Rutland, using East Midlands rates and including VAT. Your written quote follows photos or a survey, and is fixed once the repair is specified.

Guide prices inc VAT on East Midlands rates. Items marked est. are our estimates.
ItemGuide pricePer
Mid-terrace houseest.£1,750 – £3,450per house
Semi-detached house£2,450 – £4,900per house
Detached houseest.£3,450 – £6,850per house
Scaffolding where neededest.£590 – £1,750per elevation

Which repair method suits a home in Rutland?

Partial rebuild of the outer leaf

If a section of the outer leaf has bulged too far to be tied back, it is carefully taken down and rebuilt with new ties built in as the work goes up. This is uncommon, and is usually limited to a gable top, a parapet or a panel under a window.

Best for: Outer leaf too distorted to tie back safely

Isolating the old ties

Where the old ties are swelling and cracking the brickwork, fitting new ties alone may not stop further damage. Each old tie can be isolated, usually by cutting it through within the cavity or sleeving its outer end, so it can no longer lift the outer leaf as it continues to corrode.

Best for: Thick mild steel ties still causing horizontal cracking

Removing old ties and rebedding

On badly cracked elevations the old ties are cut out from the outer face, the joints raked and rebedded, and the brickwork repointed. It is more work than isolation but removes the source of expansion entirely. An engineer or the survey report usually specifies where this is needed.

Best for: Elevations with severe cracking or lifting

What happens when we carry out wall tie replacement in Rutland?

  1. Tie survey

    A metal detector locates the existing ties and shows their pattern. Small holes are then drilled at sample points and a borescope passed into the cavity to see the tie condition, type and embedment. The holes are made good afterwards.

  2. Report and quote

    You receive a written summary of what the survey found on each elevation, which walls need new ties, whether old ties should be isolated or removed, and a no-obligation written quote with scaffold shown separately.

  3. Deal with the old ties and make good

    Old ties are isolated or removed where the report calls for it, cracked joints are raked out and repointed, and drilled holes are filled in matching mortar. A written note of tie positions and findings goes in your property file.

Wall tie replacement: corroded ties isolated and new remedial ties fixed across the cavityCAVITYOLD TIECORRODEDNEW REMEDIALTIEINDICATIVE · NOT TO SCALE
Wall tie replacement: corroded ties isolated and new remedial ties fixed across the cavity. Indicative drawing, not to scale.

Do you need approval for wall tie replacement in England?

Like-for-like repairs such as crack stitching and repointing do not usually need building control approval in England, but anything that changes or strengthens the structure, such as underpinning or rebuilding a wall, does. If the work touches a party wall, the Party Wall etc. Act 1996 may apply.

Find wall tie replacement in your Rutland town

Wall tie replacement in Rutland: questions and answers

Why do houses in Rutland crack?

Rutland is Lias clay and Jurassic limestone and ironstone, with clay soils in the valleys that can move near trees. Ground movement here is more often linked to soils, drains and trees than to mining. Only an investigation on site can say why a particular building has moved.

How much will wall tie replacement cost in Rutland?

On East Midlands rates, wall tie replacement starts from about £1,750 per house, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.

Do the old wall ties have to be removed?

Not always, because thin wire ties that cannot swell are usually left in place once new ties are fitted. Thicker ties that are still expanding and cracking the wall are isolated or removed so they stop causing damage. The survey decides which applies.

Will a mortgage lender accept wall tie replacement?

Lenders generally accept properly carried out tie replacement, but they may want to see the survey, the quote or a record of the completed work. If a valuation has flagged wall ties, a written report and itemised quote are usually what the lender or buyer needs next.

Is wall tie failure covered by insurance?

Usually not, because insurers treat it as gradual deterioration. Damage caused by a sudden event, such as part of a wall collapsing in a storm, may be treated differently under some policies. Check your policy wording, and tell your insurer if you are unsure.

Related work in Rutland

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote