Sittingbourne · Kent
Wall tie replacement in Sittingbourne
For landlords with older housing stock in Sittingbourne, wall ties are worth checking before the cracks appear. A short survey on each elevation gives you a clear record and a priced plan if replacement is needed.
Guide price from£2,000per house inc VAT

- Postcodes
- ME9, ME10, ME12
- Population
- about 54,000
- Area
- Kent
- Pricing region
- South East
How do local ground conditions affect wall tie replacement in Sittingbourne?
Sittingbourne, Kent: about 54,000 residents across postcode districts ME9, ME10, ME12. Nearby places we cover include Faversham (7 miles), Gillingham (9 miles) and Maidstone (11 miles).
Much of Kent sits on clay that shrinks in dry summers and swells in wet winters. Parts of Kent lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Across Kent, most homes are Victorian terraces in the Medway towns, weatherboarded and Wealden houses, 1930s semis and seaside bungalows.
What happens during wall tie replacement, step by step?
Access
Ties are fitted across the whole of each affected elevation, so scaffold or a tower is usually needed above ground floor. We plan access around conservatories, extensions, neighbours’ land and any parking that must be suspended.
Install the new ties
New stainless ties are drilled and fixed to the specified grid, with closer spacing around windows, doors and the roofline. Sample ties can be pull-tested to confirm they are holding in your particular brick and block.
Deal with the old ties and make good
Old ties are isolated or removed where the report calls for it, cracked joints are raked out and repointed, and drilled holes are filled in matching mortar. A written note of tie positions and findings goes in your property file.
What to look for before calling about wall tie replacement
- The roof edge or verge lifting slightly above the brickwork
- Horizontal cracks along mortar joints, repeating every few brick courses
- A house built before the 1980s on an exposed or coastal site
Wall tie replacement prices in Sittingbourne
For Sittingbourne we use South East rates. Treat the table as a budget guide, inc VAT; the price you pay is the one on your written quote.
| Item | Guide price | Per |
|---|---|---|
| Mid-terrace houseest. | £2,000 – £3,900 | per house |
| Semi-detached house | £2,800 – £5,600 | per house |
| Detached houseest. | £3,900 – £7,850 | per house |
| Scaffolding where neededest. | £670 – £2,000 | per elevation |
How we usually approach wall tie replacement
Removing old ties and rebedding
On badly cracked elevations the old ties are cut out from the outer face, the joints raked and rebedded, and the brickwork repointed. It is more work than isolation but removes the source of expansion entirely. An engineer or the survey report usually specifies where this is needed.
Best for: Elevations with severe cracking or lifting
Isolating the old ties
Where the old ties are swelling and cracking the brickwork, fitting new ties alone may not stop further damage. Each old tie can be isolated, usually by cutting it through within the cavity or sleeving its outer end, so it can no longer lift the outer leaf as it continues to corrode.
Best for: Thick mild steel ties still causing horizontal cracking
Rules for wall tie replacement in England
Like-for-like repairs such as crack stitching and repointing do not usually need building control approval in England, but anything that changes or strengthens the structure, such as underpinning or rebuilding a wall, does. If the work touches a party wall, the Party Wall etc. Act 1996 may apply.
Questions about wall tie replacement in Sittingbourne
How much should I budget for wall tie replacement in Sittingbourne?
Guide prices for wall tie replacement in Sittingbourne start from about £2,000 per house, including VAT, on South East rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Can you survey a property in Sittingbourne?
Yes, Sittingbourne is covered, along with postcode districts ME9, ME10, ME12. We also cover nearby Faversham and Gillingham.
Why do houses in Kent crack?
North Kent sits on London Clay, central Kent on Gault and Weald Clays and the Downs on chalk, so shrinkable clay is widespread. East Kent around Deal and Dover had a small deep coalfield, worked until the late 1980s. Only an investigation can say why a particular building has moved.
How do I know if my wall ties have failed?
The clearest sign is horizontal cracking in the mortar joints repeating every few courses, often with a bulge or a lifted roofline. Wire ties can fail with no cracking at all, so a tie survey with a metal detector and borescope is the only reliable check.
Will a mortgage lender accept wall tie replacement?
Lenders generally accept properly carried out tie replacement, but they may want to see the survey, the quote or a record of the completed work. If a valuation has flagged wall ties, a written report and itemised quote are usually what the lender or buyer needs next.
Related work in Sittingbourne
- Gable end wall repairs
- Structural crack repairs
- Extension pulling away repairs
- Resin injection ground stabilisation
- Boundary and garden wall repairs
Wall tie replacement near Sittingbourne
Suspect failed wall ties in Sittingbourne? We offer a free initial assessment from your photos or a call, and a fixed price after the tie survey.