Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Gwynedd · Wales

Wall tie replacement in Gwynedd

We arrange surveys and price wall tie replacement throughout Gwynedd. Most of Gwynedd is on firmer ground than the clay belts of the south-east, and we take that into account before recommending a method.

Guide price from£1,650per house inc VAT

Drilling a mortar joint for a remedial wall tie on a 1960s cavity wall
Area
Gwynedd
Pricing region
Wales
Ground
Mostly firmer ground
Towns listed
6

What is the ground like in Gwynedd?

Gwynedd and Anglesey are mostly hard rock with glacial deposits, so clay shrinkage is uncommon. Historic slate quarrying and metal mining have left tips and workings in places.

Old metal-mine shafts and workings are recorded in places, so mining searches are routine for some properties. What you mostly find across Gwynedd: slate and stone terraces, chapels and cottages, Victorian seaside houses and post-war estates.

Guide prices for wall tie replacement in Gwynedd

Prices in Gwynedd are worked out on Wales rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.

Guide prices inc VAT on Wales rates. Items marked est. are our estimates.
ItemGuide pricePer
Mid-terrace houseest.£1,650 – £3,200per house
Semi-detached house£2,300 – £4,600per house
Detached houseest.£3,200 – £6,450per house
Scaffolding where neededest.£550 – £1,650per elevation

Methods for wall tie replacement

Remedial tie installation

New stainless ties are drilled through the outer leaf into the inner leaf, then fixed by mechanical expansion or resin, depending on the masonry. They are placed to a set grid across each elevation, with extra ties around openings and at the edges. Holes are made good in matching mortar.

Best for: Walls where the original ties have failed or are missing

Isolating the old ties

Where the old ties are swelling and cracking the brickwork, fitting new ties alone may not stop further damage. Each old tie can be isolated, usually by cutting it through within the cavity or sleeving its outer end, so it can no longer lift the outer leaf as it continues to corrode.

Best for: Thick mild steel ties still causing horizontal cracking

Partial rebuild of the outer leaf

If a section of the outer leaf has bulged too far to be tied back, it is carefully taken down and rebuilt with new ties built in as the work goes up. This is uncommon, and is usually limited to a gable top, a parapet or a panel under a window.

Best for: Outer leaf too distorted to tie back safely

From first photo to finished repair

  1. Tie survey

    A metal detector locates the existing ties and shows their pattern. Small holes are then drilled at sample points and a borescope passed into the cavity to see the tie condition, type and embedment. The holes are made good afterwards.

  2. Report and quote

    You receive a written summary of what the survey found on each elevation, which walls need new ties, whether old ties should be isolated or removed, and a no-obligation written quote with scaffold shown separately.

  3. Install the new ties

    New stainless ties are drilled and fixed to the specified grid, with closer spacing around windows, doors and the roofline. Sample ties can be pull-tested to confirm they are holding in your particular brick and block.

Symptoms that point to wall tie replacement

  • Outer brickwork bowing or bulging, often worst near the top
  • Mortar joints that look wider or opened up on one elevation
  • Horizontal cracks along mortar joints, repeating every few brick courses
  • The roof edge or verge lifting slightly above the brickwork
Wall tie replacement: corroded ties isolated and new remedial ties fixed across the cavityCAVITYOLD TIECORRODEDNEW REMEDIALTIEINDICATIVE · NOT TO SCALE
Wall tie replacement: corroded ties isolated and new remedial ties fixed across the cavity. Indicative drawing, not to scale.

Do you need approval for wall tie replacement in Wales?

In Wales, small like-for-like repairs do not usually need approval, but work that alters or strengthens the structure needs building control under the Welsh Building Regulations, and the Party Wall etc. Act 1996 can apply to shared walls.

Towns in Gwynedd we cover for wall tie replacement

Frequently asked questions

Is the ground in Gwynedd prone to subsidence?

Gwynedd and Anglesey are mostly hard rock with glacial deposits, so clay shrinkage is uncommon. Historic slate quarrying and metal mining have left tips and workings in places. Old metal-mine shafts and workings are recorded in places, so mining searches are routine for some properties. Only an investigation on site can say why a particular building has moved.

How much will wall tie replacement cost in Gwynedd?

On Wales rates, wall tie replacement starts from about £1,650 per house, including VAT. The written price depends on the extent of the damage, access and whether an engineer or building control is needed.

Is wall tie failure covered by insurance?

Usually not, because insurers treat it as gradual deterioration. Damage caused by a sudden event, such as part of a wall collapsing in a storm, may be treated differently under some policies. Check your policy wording, and tell your insurer if you are unsure.

Do all walls of the house need new ties?

Not necessarily, because ties often fail on one exposed elevation long before the others. The survey checks each wall, and the quote covers only the elevations where ties have failed or are close to it. Sheltered walls may simply be noted for future checks.

Do the old wall ties have to be removed?

Not always, because thin wire ties that cannot swell are usually left in place once new ties are fitted. Thicker ties that are still expanding and cracking the wall are isolated or removed so they stop causing damage. The survey decides which applies.

Other structural repairs in Gwynedd

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote