Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Tyldesley · Greater Manchester

Wall tie replacement in Tyldesley

If a mortgage valuation on a Tyldesley property has flagged possible wall tie failure, the next step is a tie survey and a written quote. We explain what the borescope found on each elevation and price only the walls that need work.

Guide price from£1,750per house inc VAT

Drilling a mortar joint for a remedial wall tie on a 1960s cavity wall
Postcodes
M29, M38, M46
Population
about 36,000
Area
Greater Manchester
Pricing region
North West

Why does the ground in Greater Manchester matter for wall tie replacement?

We cover Tyldesley and its postcode districts M29, M38, M46, part of Greater Manchester, with a population of roughly 36,000. Nearby places we cover include Leigh (2 miles), Westhoughton (3 miles) and Hindley (5 miles).

Greater Manchester has a mix of ground, with clay in some places and firmer rock in others. Parts of Greater Manchester lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Typical buildings in Greater Manchester: Red-brick terraces, mill-town stone terraces, inter-war semis and post-war estates.

Is it time for wall tie replacement? Common signs

  • Mortar joints that look wider or opened up on one elevation
  • A house built before the 1980s on an exposed or coastal site
  • Outer brickwork bowing or bulging, often worst near the top

What should you budget for wall tie replacement in Tyldesley?

Guide prices below are for homes in Tyldesley, on North West rates and including VAT. A survey or good photos let us turn them into a fixed written price.

Guide prices inc VAT on North West rates. Items marked est. are our estimates.
ItemGuide pricePer
Mid-terrace houseest.£1,750 – £3,350per house
Semi-detached house£2,400 – £4,800per house
Detached houseest.£3,350 – £6,700per house
Scaffolding where neededest.£575 – £1,750per elevation

Repair options we may recommend

Remedial tie installation

New stainless ties are drilled through the outer leaf into the inner leaf, then fixed by mechanical expansion or resin, depending on the masonry. They are placed to a set grid across each elevation, with extra ties around openings and at the edges. Holes are made good in matching mortar.

Best for: Walls where the original ties have failed or are missing

Removing old ties and rebedding

On badly cracked elevations the old ties are cut out from the outer face, the joints raked and rebedded, and the brickwork repointed. It is more work than isolation but removes the source of expansion entirely. An engineer or the survey report usually specifies where this is needed.

Best for: Elevations with severe cracking or lifting

What to expect when we carry out wall tie replacement

  1. Access

    Ties are fitted across the whole of each affected elevation, so scaffold or a tower is usually needed above ground floor. We plan access around conservatories, extensions, neighbours’ land and any parking that must be suspended.

  2. Install the new ties

    New stainless ties are drilled and fixed to the specified grid, with closer spacing around windows, doors and the roofline. Sample ties can be pull-tested to confirm they are holding in your particular brick and block.

  3. Deal with the old ties and make good

    Old ties are isolated or removed where the report calls for it, cracked joints are raked out and repointed, and drilled holes are filled in matching mortar. A written note of tie positions and findings goes in your property file.

Rules for wall tie replacement in England

Like-for-like repairs such as crack stitching and repointing do not usually need building control approval in England, but anything that changes or strengthens the structure, such as underpinning or rebuilding a wall, does. If the work touches a party wall, the Party Wall etc. Act 1996 may apply.

Your wall tie replacement questions

How much should I budget for wall tie replacement in Tyldesley?

Guide prices for wall tie replacement in Tyldesley start from about £1,750 per house, including VAT, on North West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Can you survey a property in Tyldesley?

We do. Tyldesley and the surrounding area are covered, including nearby Leigh and Westhoughton. A free initial assessment from your photos is the first step.

Why do houses in Greater Manchester crack?

Greater Manchester is mostly glacial till over sandstone and mudstone, with the Lancashire coalfield beneath much of Wigan, Bolton, Salford and parts of the east. Historic mine workings, made ground and old mill sites are common. Only an investigation can say why a particular building has moved.

How do I know if my wall ties have failed?

The clearest sign is horizontal cracking in the mortar joints repeating every few courses, often with a bulge or a lifted roofline. Wire ties can fail with no cracking at all, so a tie survey with a metal detector and borescope is the only reliable check.

Can wall ties be replaced on a rendered house?

Yes, new ties can be fitted through render, with each drill hole made good afterwards. The repairs can show on painted render, so redecoration of the affected elevation is often worth including. Render can also hide the cracking pattern, so a survey matters more.

Related work in Tyldesley

Wall tie replacement near Tyldesley

Need a report for a buyer or lender in Tyldesley? Send us the valuation comment and we will explain what a tie survey and quote would cover.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote