Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Christchurch · Dorset

Underpinning in Christchurch

Most underpinning in Christchurch, as elsewhere, is partial, strengthening one corner or a single wall rather than the whole house. The engineer plans how the new foundation meets the old so that the junction does not become the next place to crack.

Guide price from£1,050per metre of wall inc VAT

Underpinning bay excavated beneath a brick house footing with fresh concrete placed
Postcodes
BH6, BH7, BH23
Population
about 31,000
Area
Dorset
Pricing region
South West

Why does the ground in Dorset matter for underpinning?

Christchurch is in Dorset and takes in postcode districts BH6, BH7, BH23. About 31,000 people live there. We also take enquiries from nearby Bournemouth (4 miles), New Milton (5 miles) and Ferndown (7 miles).

Clay soils are found in parts of Dorset. Ground movement here is more often linked to soils, drains and trees than to mining. Housing stock in Dorset: Stone and brick villages, Victorian villas in Bournemouth, and inter-war and post-war semis.

Guide prices for underpinning in Christchurch

Prices in Christchurch are worked out on South West rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.

Guide prices inc VAT on South West rates. Items marked est. are our estimates.
ItemGuide pricePer
Mass-concrete underpinning£1,050 – £1,550per metre of wall
Beam-and-base underpinning£1,550 – £2,600per metre of wall
Mini-piled underpinning£2,050 – £3,600per metre of wall
Engineer's design and building control feesest.£825 – £2,600per scheme

Methods for underpinning

Beam-and-base underpinning

A reinforced concrete beam is cast beneath or alongside the existing footing and carries the wall onto mass concrete bases at intervals. It spreads load well across variable ground and can mean less digging than continuous underpinning along the whole wall.

Best for: Longer runs of wall or heavier loads over variable ground

Mini-piled underpinning

Small-diameter piles are driven or bored down to firm ground and linked by a reinforced beam or needles that pick up the wall. Compact rigs fit through narrow access, and the method reaches depths that would be impractical to excavate by hand.

Best for: Deep soft ground, tree roots, or restricted access

From first photo to finished repair

  1. Engineer’s investigation

    An independent chartered structural engineer studies the monitoring results, trial pits and soil tests, then decides whether underpinning is needed and which method suits. We can arrange the engineer if you do not already have one.

  2. Design and approvals

    The engineer produces drawings and calculations. We make the building control or building warrant application, and party wall notices are served where the law requires them, before any digging starts.

  3. Fixed written price

    With the design in hand we confirm a fixed price in writing, setting out the method, the length of wall, access arrangements and the making good. For insurance work we can price to the loss adjuster’s or engineer’s schedule.

Symptoms that point to underpinning

  • Cracks that keep widening after the drains have been repaired
  • Floors sloping noticeably towards one external wall
  • Footings found to be very shallow during a trial pit

Rules for underpinning in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Frequently asked questions

How much should I budget for underpinning in Christchurch?

Guide prices for underpinning in Christchurch start from about £1,050 per metre of wall, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Can you survey a property in Christchurch?

Yes. We take enquiries from across Christchurch, including BH6, BH7, BH23, and from nearby places such as Bournemouth and New Milton. Send photos for a free initial view and we will tell you what happens next.

Why do houses in Dorset crack?

Dorset mixes chalk downs, Oxford and Kimmeridge Clays in the vales, and the sands and gravels of the Poole basin. Clay vales can shrink and swell, and parts of the coast are known for landslip. Only an investigation can say why a particular building has moved.

Do I need to tell my neighbours about underpinning?

In England and Wales you usually do. Underpinning a party wall normally needs two months’ notice, and excavating near a neighbour’s foundations needs one month’s notice under the Party Wall etc. Act 1996. Scotland and Northern Ireland have no equivalent Act, but agreeing the work in writing still helps.

Can you underpin only part of a house?

Yes, partial underpinning of one corner or one wall is common, though the engineer must think about the junction with the unstrengthened part. A sudden change in foundation depth can cause new cracking, so the scheme may step down gradually or include a movement joint.

Related work in Christchurch

Underpinning near Christchurch

If your insurer has agreed underpinning for your Christchurch home, share the loss adjuster’s schedule and we will price the repair to it in writing.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote