Washington · Tyne and Wear
Structural crack repairs in Washington
A cracked wall in Washington does not automatically mean subsidence. Thermal movement, rusting wall ties, tired lintels and old drains each leave their own pattern, and we look at the whole picture before recommending any repair to the brickwork.
Guide price from£75per metre of crack inc VAT
- Postcodes
- NE37, NE38
- Population
- about 67,000
- Area
- Tyne and Wear
- Pricing region
- North East
What should you know about the ground under Washington?
Washington (NE37, NE38) has around 67,000 residents and sits in Tyne and Wear. Nearby, we also cover Chester-le-Street (4 miles), Houghton-le-Spring (5 miles) and Sunderland (5 miles).
Tyne and Wear has a mix of ground, with clay in some places and firmer rock in others. Historic coal workings are recorded beneath parts of Tyne and Wear, and a coal mining search is worth checking where movement is unexplained. Housing stock in Tyne and Wear: Tyneside flats and terraces, Victorian villas, inter-war council estates and post-war semis.
What happens during structural crack repairs, step by step?
Send photos
Photograph the crack from a distance and close up, with a coin or tape measure for scale. From these we say whether it looks cosmetic, needs a visit or calls for an engineer.
Deal with the cause
Leaking drains, failed ties, a sagging lintel or ground movement are put right first, sometimes through an insurance claim. Repairing a crack before its cause is fixed usually means paying for the same job twice.
Repair and make good
Cracks are stitched, repointed or rebuilt as specified, with mortar matched to the existing wall. Internal crack lines are filled and redecorated where included, and you get a written note of what was done.
What to look for before calling about structural crack repairs
- A crack noticeably wider at the top than the bottom, or the reverse
- Doors or windows that have started sticking or no longer latch
- Diagonal cracks running from the corners of windows and doors
Structural crack repairs prices in Washington
Prices in Washington are worked out on North East rates. They include VAT and are a starting point: access, the extent of the damage and whether an engineer or building control is involved all move the figure.
| Item | Guide price | Per |
|---|---|---|
| Crack stitching with helical bars | £75 – £165 | per metre of crack |
| Single crack, outside only (up to about 2 m)est. | £370 – £830 | per crack |
| Internal making good and redecoration of the crack lineest. | £140 – £460 | per room |
How we usually approach structural crack repairs
Crack stitching with helical bars
Stainless steel helical bars are grouted into slots cut along the bed joints, bridging the crack so the masonry works as one piece again. It is the standard repair for wider stepped and vertical cracks once whatever caused them has stopped.
Best for: Stable cracks wider than about 5 mm, or ones that keep reopening
Rebuilding a cracked section
Where bricks have split or the wall has moved out of line, the damaged area is taken down and rebuilt, bonded into sound masonry on either side. Reclaimed or matched bricks keep the repair discreet, with temporary support used where needed.
Best for: Badly displaced or broken brickwork
Rules for structural crack repairs in England
Like-for-like repairs such as crack stitching and repointing do not usually need building control approval in England, but anything that changes or strengthens the structure, such as underpinning or rebuilding a wall, does. If the work touches a party wall, the Party Wall etc. Act 1996 may apply.
Questions about structural crack repairs in Washington
How much will structural crack repairs cost in Washington?
Guide prices for structural crack repairs in Washington start from about £75 per metre of crack, including VAT, on North East rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you cover Washington?
Yes, Washington is covered, along with postcode districts NE37, NE38. We also cover nearby Chester-le-Street and Houghton-le-Spring.
Is the ground in Tyne and Wear prone to subsidence?
Tyne and Wear lies on the Durham and Northumberland coalfield, with old shallow workings recorded beneath parts of Newcastle, Gateshead and Sunderland, mostly under a cover of glacial clay. Only an investigation can say why a particular building has moved.
What do stepped cracks in brickwork mean?
Stepped cracks usually mean part of the wall has moved and the weakest path, the mortar joints, has given way. They are common with subsidence and around openings. A thin stepped crack unchanged for years is often cosmetic, while a wide or tapered one should be looked at.
What causes vertical cracks in walls?
Vertical cracks are most often caused by thermal or moisture movement in long walls, or by the joint between old and newer work. An even-width vertical crack is usually cosmetic. One clearly wider at the top or bottom can indicate foundation movement at one end.
Other structural repairs in Washington
- Wall tie replacement
- Subsidence repairs
- Retaining wall repairs
- Resin injection ground stabilisation
- Roof structure repairs
Structural crack repairs near Washington
Worried about a crack in Washington? Photograph it with a tape measure across it, send it over, and we will tell you plainly whether it needs repair.