Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Fareham · Hampshire

Resin injection ground stabilisation in Fareham

A sunken floor slab or a settled corner in a Fareham home can sometimes be treated from the surface with expanding resin. Levels are read throughout, and monitoring afterwards shows whether the ground is holding before the cracks are repaired.

Guide price from£895per metre of wall treated inc VAT

Resin being injected at the base of a brick wall while a laser level checks for movement
Postcodes
PO14, PO15, PO16
Population
about 42,000
Area
Hampshire
Pricing region
South East

How do local ground conditions affect resin injection ground stabilisation in Fareham?

Fareham, Hampshire: about 42,000 residents across postcode districts PO14, PO15, PO16. Nearby, we also cover Portsmouth (5 miles), Hedge End (7 miles) and Waterlooville (7 miles).

Shrinkable clay is widespread in Hampshire. Ground movement here is more often linked to soils, drains and trees than to mining. Housing stock in Hampshire: Victorian terraces in Portsmouth and Southampton, 1930s semis, and large post-war and new-build estates.

Symptoms that point to resin injection ground stabilisation

  • Floor slab dropping or hollow-sounding near one external wall
  • Settlement after a drain leak has been found and repaired
  • Cracks over a section of wall built on loose fill

Guide prices for resin injection ground stabilisation in Fareham

Guide prices below are for homes in Fareham, on South East rates and including VAT. A survey or good photos let us turn them into a fixed written price.

Guide prices inc VAT on South East rates. Items marked est. are our estimates.
ItemGuide pricePer
Resin injection ground stabilisation£895 – £1,700per metre of wall treated
Typical domestic project£5,600 – £16,800per project
Level monitoring after treatmentest.£390 – £1,000per programme

Methods for resin injection ground stabilisation

Resin alongside other repairs

Injection often forms one part of a wider scheme: drains repaired first, resin under the affected section, then crack stitching and making good once readings settle. On a mixed site, one wall may suit resin while another needs conventional underpinning instead.

Best for: Localised settlement within a broader subsidence repair

Slab void filling and lifting

Small holes are drilled through the floor, and resin is fed into the void between the slab and the fill. As it expands it fills the gap and can lift the slab by small, controlled amounts. Floor coverings are lifted locally and the holes filled afterwards.

Best for: Sunken concrete ground floors and garage slabs

From first photo to finished repair

  1. Ground and drain checks

    Trial pits or probes confirm the soil profile, and a CCTV drain survey checks for leaks and for pipes in the injection zone. Damaged drains are repaired first, so resin is not lost into them or used to treat a cause that is still active.

  2. Design and written price

    The injection depths, spacing and target lift are set out before work starts. We confirm a fixed price in writing for the treated length, the monitoring and the making good, and deal with building control where the work needs it.

  3. Level monitoring

    Readings after treatment show whether the ground is holding. Once they are steady, cracks are stitched and redecoration can follow. If a section keeps moving, the engineer decides whether further injection or a different method is needed.

Rules for resin injection ground stabilisation in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Frequently asked questions

How much should I budget for resin injection ground stabilisation in Fareham?

Guide prices for resin injection ground stabilisation in Fareham start from about £895 per metre of wall treated, including VAT, on South East rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Can you survey a property in Fareham?

Yes, Fareham is covered, along with postcode districts PO14, PO15, PO16. We also cover nearby Portsmouth and Hedge End.

Why do houses in Hampshire crack?

Central Hampshire is chalk, while the south around Portsmouth, Southampton and the New Forest fringe and the north-east around Farnborough sit on London Clay, Reading Beds and other clays and sands. The clay areas see seasonal movement near trees. Only an investigation can say why a particular building has moved.

How do I know if my house is suitable?

An engineer decides, based on the soil type, the depth to firm ground and the cause of movement. Send us photos and any reports for a free initial assessment. We will say honestly if resin looks unlikely to suit and a different repair is worth considering.

Will I need to move out?

Usually not, because most domestic injection is done from outside along the wall over one or two days. Slab treatments mean working inside, so furniture and floor coverings are moved locally. There is drilling noise, but very little dust or spoil compared with digging.

Related work in Fareham

Resin injection ground stabilisation near Fareham

Start with photos of the affected wall or floor in Fareham; a free initial assessment follows, then a fixed written price once the treatment is designed.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote