Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Bournemouth · Dorset

Resin injection ground stabilisation in Bournemouth

Choosing resin for a Bournemouth property starts with a soil profile and a drain survey rather than a price. Once both are known, the engineer sets the injection depths and spacing, and we confirm a fixed price in writing for the treatment.

Guide price from£825per metre of wall treated inc VAT

Resin being injected at the base of a brick wall while a laser level checks for movement
Postcodes
BH1, BH2, BH4
Population
about 160,000
Area
Dorset
Pricing region
South West

What is the ground like in Dorset?

Bournemouth (BH1, BH2, BH4) has around 160,000 residents and sits in Dorset. Nearby, we also cover Christchurch (4 miles), Poole (5 miles) and Ferndown (6 miles).

Dorset has a mix of ground, with clay in some places and firmer rock in others. Ground movement here is more often linked to soils, drains and trees than to mining. Across Dorset, most homes are stone and brick villages, Victorian villas in Bournemouth, and inter-war and post-war semis.

Repair options we may recommend

Slab void filling and lifting

Small holes are drilled through the floor, and resin is fed into the void between the slab and the fill. As it expands it fills the gap and can lift the slab by small, controlled amounts. Floor coverings are lifted locally and the holes filled afterwards.

Best for: Sunken concrete ground floors and garage slabs

Injection beneath strip footings

Holes are drilled at close spacing along the wall, and tubes are placed at one or more depths below the footing. Resin is injected in stages from the bottom up, building a stiffened zone of ground under the wall while levels are read continuously.

Best for: Settled walls on loose or washed-out soil at shallow depth

What to expect when we carry out resin injection ground stabilisation

  1. Is resin suitable?

    Send photos and any reports you hold. We give a free initial assessment, and an independent engineer then checks soil type, depth to firm ground and the cause. We can arrange the engineer. Clay and tree problems need particular care.

  2. Ground and drain checks

    Trial pits or probes confirm the soil profile, and a CCTV drain survey checks for leaks and for pipes in the injection zone. Damaged drains are repaired first, so resin is not lost into them or used to treat a cause that is still active.

  3. Level monitoring

    Readings after treatment show whether the ground is holding. Once they are steady, cracks are stitched and redecoration can follow. If a section keeps moving, the engineer decides whether further injection or a different method is needed.

Is it time for resin injection ground stabilisation? Common signs

  • Gaps opening beneath a ground-floor slab or path
  • Cracks over a section of wall built on loose fill
  • Floor slab dropping or hollow-sounding near one external wall

What should you budget for resin injection ground stabilisation in Bournemouth?

The ranges below reflect typical South West costs for resin injection ground stabilisation, including VAT. Scaffold, access and making good can push a job to the top of the range.

Guide prices inc VAT on South West rates. Items marked est. are our estimates.
ItemGuide pricePer
Resin injection ground stabilisation£825 – £1,550per metre of wall treated
Typical domestic project£5,150 – £15,400per project
Level monitoring after treatmentest.£360 – £925per programme

Rules for resin injection ground stabilisation in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Your resin injection ground stabilisation questions

What is the price of resin injection ground stabilisation in Bournemouth?

Guide prices for resin injection ground stabilisation in Bournemouth start from about £825 per metre of wall treated, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you carry out resin injection ground stabilisation in Bournemouth?

We do. Bournemouth and the surrounding area are covered, including nearby Christchurch and Poole. A free initial assessment from your photos is the first step.

Does the ground around Bournemouth cause cracking?

Dorset mixes chalk downs, Oxford and Kimmeridge Clays in the vales, and the sands and gravels of the Poole basin. Clay vales can shrink and swell, and parts of the coast are known for landslip. Only an investigation can say why a particular building has moved.

How do I know if my house is suitable?

An engineer decides, based on the soil type, the depth to firm ground and the cause of movement. Send us photos and any reports for a free initial assessment. We will say honestly if resin looks unlikely to suit and a different repair is worth considering.

Is resin injection better than underpinning?

It is better for some jobs and unsuitable for others. Resin is quicker and less disruptive where the problem is loose or washed-out soil close to the footing. Underpinning or mini-piles are usually the safer choice for deep soft ground or clay dried by trees that cannot be removed.

More repairs we carry out in Bournemouth

Resin injection ground stabilisation near Bournemouth

Send us the drain survey and any soil information for your Bournemouth property, and we will confirm the next step and a guide price.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote