Exeter · Devon
Resin injection ground stabilisation in Exeter
For a Exeter house that has settled over loose fill or ground washed out by a drain, expanding resin can firm the soil in a day or two. It is done through small drilled holes, so gardens and paths are left largely as they were.
Guide price from£825per metre of wall treated inc VAT
- Postcodes
- EX1, EX2, EX3, EX4
- Population
- about 130,000
- Area
- Devon
- Pricing region
- South West
How do local ground conditions affect resin injection ground stabilisation in Exeter?
Exeter, Devon: about 130,000 residents across postcode districts EX1, EX2, EX3, EX4. Neighbouring towns we cover: Exmouth (9 miles), Tiverton (12 miles) and Newton Abbot (14 miles).
Shrinkable clay is less common in Devon than in south-east England. Old metal-mine shafts and workings are recorded in places, so mining searches are routine for some properties. What you mostly find across Devon: cob and stone cottages, Victorian terraces in Exeter, Plymouth and Torbay, and post-war estates.
Methods for resin injection ground stabilisation
Slab void filling and lifting
Small holes are drilled through the floor, and resin is fed into the void between the slab and the fill. As it expands it fills the gap and can lift the slab by small, controlled amounts. Floor coverings are lifted locally and the holes filled afterwards.
Best for: Sunken concrete ground floors and garage slabs
Injection beneath strip footings
Holes are drilled at close spacing along the wall, and tubes are placed at one or more depths below the footing. Resin is injected in stages from the bottom up, building a stiffened zone of ground under the wall while levels are read continuously.
Best for: Settled walls on loose or washed-out soil at shallow depth
From first photo to finished repair
Is resin suitable?
Send photos and any reports you hold. We give a free initial assessment, and an independent engineer then checks soil type, depth to firm ground and the cause. We can arrange the engineer. Clay and tree problems need particular care.
Ground and drain checks
Trial pits or probes confirm the soil profile, and a CCTV drain survey checks for leaks and for pipes in the injection zone. Damaged drains are repaired first, so resin is not lost into them or used to treat a cause that is still active.
Injection day
Holes are drilled, tubes placed and resin injected in stages while laser levels on the wall are watched for any rise. Most domestic jobs are done from outside, with little mess. Holes are filled and joints made good at the end.
Symptoms that point to resin injection ground stabilisation
- Cracks over a section of wall built on loose fill
- Floor slab dropping or hollow-sounding near one external wall
- A corner that has dropped but no longer moves with the seasons
Guide prices for resin injection ground stabilisation in Exeter
The ranges below reflect typical South West costs for resin injection ground stabilisation, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Resin injection ground stabilisation | £825 – £1,550 | per metre of wall treated |
| Typical domestic project | £5,150 – £15,400 | per project |
| Level monitoring after treatmentest. | £360 – £925 | per programme |
Rules for resin injection ground stabilisation in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Frequently asked questions
What is the price of resin injection ground stabilisation in Exeter?
Guide prices for resin injection ground stabilisation in Exeter start from about £825 per metre of wall treated, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you carry out resin injection ground stabilisation in Exeter?
Yes. We take enquiries from across Exeter, including EX1, EX2, EX3, EX4, and from nearby places such as Exmouth and Tiverton. Send photos for a free initial view and we will tell you what happens next.
Does the ground around Exeter cause cracking?
Devon's ground is mostly older mudstones, sandstones and granite, so shrinkable-clay subsidence is less widespread than further east. Older solid-walled and cob buildings, steep sites and retaining walls are the more common structural concerns. Only an investigation can say why a particular building has moved.
How do I know if my house is suitable?
An engineer decides, based on the soil type, the depth to firm ground and the cause of movement. Send us photos and any reports for a free initial assessment. We will say honestly if resin looks unlikely to suit and a different repair is worth considering.
How long does resin injection last?
The cured resin itself is stable and does not break down in normal ground. Whether the repair lasts depends on whether the cause of movement has been removed, which is why drains are checked and monitoring follows. If the ground was the only problem, the treatment is usually long-term.
More repairs we carry out in Exeter
Resin injection ground stabilisation near Exeter
Wondering whether resin injection suits your Exeter home? Send photos and any reports for a free initial assessment and an honest view.