Burntwood · Staffordshire
Lintel replacement in Burntwood
Bay windows on older houses around Burntwood often hide a timber lintel behind the face brickwork. When that timber rots, the bay brickwork drops and cracks, and replacing it properly means supporting the wall above throughout the job.
Guide price from£750per opening inc VAT
- Postcodes
- WS7
- Population
- about 29,000
- Area
- Staffordshire
- Pricing region
- West Midlands
What is the ground like in Staffordshire?
Burntwood is in Staffordshire and takes in postcode districts WS7. About 29,000 people live there. Nearby, we also cover Great Wyrley (4 miles), Lichfield (4 miles) and Cannock (4 miles).
Clay soils are found in parts of Staffordshire. Parts of Staffordshire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. What you mostly find across Staffordshire: Potteries terraces, brick villas, inter-war semis and post-war estates.
What happens during lintel replacement, step by step?
Inspect the opening
We look at the crack pattern, the type of lintel and what sits above it. Pictures of both faces of the window, plus any visible lintel edge, help us judge it before visiting.
Specify the replacement
We confirm the lintel type, length and bearing needed. For wide openings, bays or walls with unusual loads, an engineer may specify it, and where the repair needs an engineer’s design or sign-off we can arrange one.
Remove and replace
Brickwork is carefully taken out above the lintel, the old lintel removed and the new one bedded level on full bearings. A cavity tray goes in where relevant, then the brickwork above is relaid.
What to look for before calling about lintel replacement
- A diagonal crack climbing away from a window head
- Soft, crumbly timber visible behind the brick face over a bay
- Damp patches on the inside wall just above a window
Lintel replacement prices in Burntwood
For Burntwood we use West Midlands rates. Treat the table as a budget guide, inc VAT; the price you pay is the one on your written quote.
| Item | Guide price | Per |
|---|---|---|
| Standard window or door opening | £750 – £2,500 | per opening |
| Wide or bay openingest. | £2,000 – £4,500 | per opening |
| Making good inside and outest. | £150 – £600 | per opening |
How we usually approach lintel replacement
Replacement with a cavity tray
A damp-proof membrane is laid over the new lintel with stop ends and weep holes, so water running down the cavity is directed out rather than into the house. Many older lintels were installed without one, which is often why they failed.
Best for: Cavity walls with damp above windows
Like-for-like replacement
The failed lintel comes out and one of suitable type and size is bedded on mortar with adequate bearing at each end. Bricks above are relaid to match the original bond and the joints are pointed to blend with the surrounding wall.
Best for: Standard windows and doors with a single failed lintel
Rules for lintel replacement in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Questions about lintel replacement in Burntwood
What is the price of lintel replacement in Burntwood?
Guide prices for lintel replacement in Burntwood start from about £750 per opening, including VAT, on West Midlands rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you carry out lintel replacement in Burntwood?
Yes. We take enquiries from across Burntwood, including WS7, and from nearby places such as Great Wyrley and Lichfield. Send photos for a free initial view and we will tell you what happens next.
Does the ground around Burntwood cause cracking?
North Staffordshire around Stoke-on-Trent, Newcastle-under-Lyme and Kidsgrove, and the Cannock Chase area, lie on coalfields with recorded workings. Much of the rest of the county is Mercia Mudstone and glacial clay. Only an investigation can say why a particular building has moved.
How long does it take to replace a lintel?
Most single lintels are replaced in one to two days. The props stay in until the mortar has gained enough strength, and wide bays or openings with both inner and outer lintels can take longer. The window can usually be used again once the supports come out.
Do I need building regulations approval to replace a lintel?
In England and Wales, replacing a lintel is structural work and building control will usually need to approve it. Rules differ in Scotland and Northern Ireland. We deal with building control where the work needs it, and include the cost in the quote.
More repairs we carry out in Burntwood
- Boundary and garden wall repairs
- Structural crack repairs
- Underpinning
- Gable end wall repairs
- Retaining wall repairs
Lintel replacement near Burntwood
If rust is showing above the windows of your Burntwood home, photograph it close up and we will tell you whether replacement is due.