Frome · Somerset
Lintel replacement in Frome
Bay windows on older houses around Frome often hide a timber lintel behind the face brickwork. When that timber rots, the bay brickwork drops and cracks, and replacing it properly means supporting the wall above throughout the job.
Guide price from£770per opening inc VAT
- Postcodes
- BA11
- Population
- about 26,000
- Area
- Somerset
- Pricing region
- South West
How do local ground conditions affect lintel replacement in Frome?
With roughly 26,000 people, Frome spans postcode districts BA11 in Somerset. Nearby places we cover include Westbury (6 miles), Warminster (6 miles) and Trowbridge (8 miles).
Parts of Somerset have clay that can shrink near trees in dry spells. Parts of Somerset lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Typical buildings in Somerset: Bath stone Georgian terraces, Victorian houses in Taunton and Weston-super-Mare, and post-war estates.
Lintel replacement prices in Frome
These are guide prices for Frome, using South West rates and including VAT. Your written quote follows photos or a survey, and is fixed once the repair is specified.
| Item | Guide price | Per |
|---|---|---|
| Standard window or door opening | £770 – £2,600 | per opening |
| Wide or bay openingest. | £2,050 – £4,650 | per opening |
| Making good inside and outest. | £155 – £620 | per opening |
How we usually approach lintel replacement
Like-for-like replacement
The failed lintel comes out and one of suitable type and size is bedded on mortar with adequate bearing at each end. Bricks above are relaid to match the original bond and the joints are pointed to blend with the surrounding wall.
Best for: Standard windows and doors with a single failed lintel
Inner and outer lintel replacement
Solid walls and some cavity walls carry separate lintels on the inside and outside faces. Where both have failed, each is replaced in turn, keeping the wall supported throughout. Internal plaster and reveals are then made good and redecorated where included.
Best for: Older solid walls with rotten timber across the inner face
What happens during lintel replacement, step by step?
Specify the replacement
We confirm the lintel type, length and bearing needed. For wide openings, bays or walls with unusual loads, an engineer may specify it, and where the repair needs an engineer’s design or sign-off we can arrange one.
Support the wall
Props or needles are set so the brickwork above carries no load on the old lintel. Windows are protected or temporarily removed where the work demands it, and the room inside is sheeted against dust.
Remove and replace
Brickwork is carefully taken out above the lintel, the old lintel removed and the new one bedded level on full bearings. A cavity tray goes in where relevant, then the brickwork above is relaid.
What to look for before calling about lintel replacement
- Rust stains or flaking steel showing above the frame
- Brickwork above an opening visibly dipping in the middle
- Damp patches on the inside wall just above a window
Rules for lintel replacement in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Questions about lintel replacement in Frome
What is the price of lintel replacement in Frome?
Guide prices for lintel replacement in Frome start from about £770 per opening, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you carry out lintel replacement in Frome?
Yes. We take enquiries from across Frome, including BA11, and from nearby places such as Westbury and Warminster. Send photos for a free initial view and we will tell you what happens next.
Does the ground around Frome cause cracking?
Somerset mixes Lias clays, Mercia Mudstone, limestone hills and the peat and alluvium of the Levels around Bridgwater, which can settle. The former Somerset coalfield around Radstock and Midsomer Norton left recorded workings. Only an investigation can say why a particular building has moved.
How long does it take to replace a lintel?
Most single lintels are replaced in one to two days. The props stay in until the mortar has gained enough strength, and wide bays or openings with both inner and outer lintels can take longer. The window can usually be used again once the supports come out.
Is it safe to live in the house during lintel replacement?
Yes, in almost all cases. The wall is fully supported before anything is removed, and the work is confined to one opening at a time. The affected room is sheeted against dust and kept clear while props are in place.
More repairs we carry out in Frome
- Boundary and garden wall repairs
- Underpinning
- Brick arch repairs
- Retaining wall repairs
- Mining subsidence repairs
Lintel replacement near Frome
Have several failed lintels on one Frome property? We will price each opening individually so you can plan the work in stages.