Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Market Harborough · Leicestershire

Lintel replacement in Market Harborough

A lintel problem in Market Harborough, as anywhere, usually shows first as a crack climbing from the corner of a window. We look at what is actually spanning the opening, whether timber, steel, concrete or brick, and what has made it fail.

Guide price from£735per opening inc VAT

Window opening propped while an old concrete lintel is replaced with a steel lintel
Postcodes
LE16
Population
about 25,000
Area
Leicestershire
Pricing region
East Midlands

Why does the ground in Leicestershire matter for lintel replacement?

With roughly 25,000 people, Market Harborough spans postcode districts LE16 in Leicestershire. We also take enquiries from nearby Corby (10 miles), Kettering (10 miles) and Wigston (10 miles).

Leicestershire has a mix of ground, with clay in some places and firmer rock in others. Parts of Leicestershire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. What you mostly find across Leicestershire: Victorian terraces in Leicester and Loughborough, inter-war semis and large post-war estates.

How much will lintel replacement cost in Market Harborough?

The ranges below reflect typical East Midlands costs for lintel replacement, including VAT. Scaffold, access and making good can push a job to the top of the range.

Guide prices inc VAT on East Midlands rates. Items marked est. are our estimates.
ItemGuide pricePer
Standard window or door opening£735 – £2,450per opening
Wide or bay openingest.£1,950 – £4,400per opening
Making good inside and outest.£145 – £590per opening

Which repair method suits a home in Market Harborough?

Propping and needling

Adjustable props carry the wall above while the old lintel comes out. For heavier walls, short steel needles are passed through holes cut above the opening and propped on both sides, taking the load off the lintel completely. The supports stay until the new work has set.

Best for: Openings with heavy walls, upper floors or bay windows above

Replacement with a cavity tray

A damp-proof membrane is laid over the new lintel with stop ends and weep holes, so water running down the cavity is directed out rather than into the house. Many older lintels were installed without one, which is often why they failed.

Best for: Cavity walls with damp above windows

What happens when we carry out lintel replacement in Market Harborough?

  1. Inspect the opening

    We look at the crack pattern, the type of lintel and what sits above it. Pictures of both faces of the window, plus any visible lintel edge, help us judge it before visiting.

  2. Remove and replace

    Brickwork is carefully taken out above the lintel, the old lintel removed and the new one bedded level on full bearings. A cavity tray goes in where relevant, then the brickwork above is relaid.

  3. Remove supports and make good

    Once the mortar has gained strength, props and needles come out and their holes are made good. Pointing, reveals and plaster are finished, and the window is refitted or checked for smooth operation.

Signs you may need lintel replacement

  • Damp patches on the inside wall just above a window
  • Soft, crumbly timber visible behind the brick face over a bay
  • Window or door frames that have started to bind or distort

Rules for lintel replacement in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Lintel replacement in Market Harborough: questions and answers

How much will lintel replacement cost in Market Harborough?

Guide prices for lintel replacement in Market Harborough start from about £735 per opening, including VAT, on East Midlands rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you cover Market Harborough?

We do. Market Harborough and the surrounding area are covered, including nearby Corby and Kettering. A free initial assessment from your photos is the first step.

Is the ground in Leicestershire prone to subsidence?

Leicestershire has Mercia Mudstone, Lias clay and glacial till across much of the county, with the Coalville and Swadlincote coalfield in the north-west. Clay soils near large trees can move with the seasons. Only an investigation can say why a particular building has moved.

How do I know if a lintel has failed?

The most common sign is a diagonal or stepped crack running up from the top corner of a window or door. Others include a dip in the brickwork above, rust or rot visible at the lintel edge, and windows that start to stick. A crack alone can have other causes, so it is worth checking.

Can a lintel be replaced without removing the window?

Often yes. With the wall propped or needled, the old lintel can usually be cut out above the frame. If the frame has been carrying load or the lintel sits tight on it, the window may need removing and refitting, which we include in the quote.

Other structural repairs in Market Harborough

Lintel replacement near Market Harborough

Have several failed lintels on one Market Harborough property? We will price each opening individually so you can plan the work in stages.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote