Margate · Kent
Lintel replacement in Margate
A lintel problem in Margate, as anywhere, usually shows first as a crack climbing from the corner of a window. We look at what is actually spanning the opening, whether timber, steel, concrete or brick, and what has made it fail.
Guide price from£840per opening inc VAT
- Postcodes
- CT8, CT9, CT11
- Population
- about 63,000
- Area
- Kent
- Pricing region
- South East
Why does the ground in Kent matter for lintel replacement?
Margate is in Kent and takes in postcode districts CT8, CT9, CT11. About 63,000 people live there. Neighbouring towns we cover: Ramsgate (3 miles), Deal (11 miles) and Herne Bay (11 miles).
Shrinkable clay is widespread in Kent. Parts of Kent lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Housing stock in Kent: Victorian terraces in the Medway towns, weatherboarded and Wealden houses, 1930s semis and seaside bungalows.
Which repair method suits a home in Margate?
Replacement with a cavity tray
A damp-proof membrane is laid over the new lintel with stop ends and weep holes, so water running down the cavity is directed out rather than into the house. Many older lintels were installed without one, which is often why they failed.
Best for: Cavity walls with damp above windows
Inner and outer lintel replacement
Solid walls and some cavity walls carry separate lintels on the inside and outside faces. Where both have failed, each is replaced in turn, keeping the wall supported throughout. Internal plaster and reveals are then made good and redecorated where included.
Best for: Older solid walls with rotten timber across the inner face
What happens when we carry out lintel replacement in Margate?
Inspect the opening
We look at the crack pattern, the type of lintel and what sits above it. Pictures of both faces of the window, plus any visible lintel edge, help us judge it before visiting.
Support the wall
Props or needles are set so the brickwork above carries no load on the old lintel. Windows are protected or temporarily removed where the work demands it, and the room inside is sheeted against dust.
Remove and replace
Brickwork is carefully taken out above the lintel, the old lintel removed and the new one bedded level on full bearings. A cavity tray goes in where relevant, then the brickwork above is relaid.
Signs you may need lintel replacement
- Window or door frames that have started to bind or distort
- Brickwork above an opening visibly dipping in the middle
- Soft, crumbly timber visible behind the brick face over a bay
How much will lintel replacement cost in Margate?
The ranges below reflect typical South East costs for lintel replacement, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Standard window or door opening | £840 – £2,800 | per opening |
| Wide or bay openingest. | £2,250 – £5,050 | per opening |
| Making good inside and outest. | £170 – £670 | per opening |
Rules for lintel replacement in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Lintel replacement in Margate: questions and answers
How much will lintel replacement cost in Margate?
Guide prices for lintel replacement in Margate start from about £840 per opening, including VAT, on South East rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you cover Margate?
Yes. We take enquiries from across Margate, including CT8, CT9, CT11, and from nearby places such as Ramsgate and Deal. Send photos for a free initial view and we will tell you what happens next.
Is the ground in Kent prone to subsidence?
North Kent sits on London Clay, central Kent on Gault and Weald Clays and the Downs on chalk, so shrinkable clay is widespread. East Kent around Deal and Dover had a small deep coalfield, worked until the late 1980s. Only an investigation can say why a particular building has moved.
How long does it take to replace a lintel?
Most single lintels are replaced in one to two days. The props stay in until the mortar has gained enough strength, and wide bays or openings with both inner and outer lintels can take longer. The window can usually be used again once the supports come out.
Can a lintel be replaced without removing the window?
Often yes. With the wall propped or needled, the old lintel can usually be cut out above the frame. If the frame has been carrying load or the lintel sits tight on it, the window may need removing and refitting, which we include in the quote.
Other structural repairs in Margate
- Boundary and garden wall repairs
- Roof structure repairs
- Extension pulling away repairs
- Wall tie replacement
- Structural crack repairs
Lintel replacement near Margate
Send photos of the cracked or sagging opening at your Margate home for a free initial assessment and an honest view on the lintel.