Tiverton · Devon
Lintel replacement in Tiverton
Lintels over existing windows and doors in Tiverton homes are replaced one opening at a time, with the wall fully supported. Inside, rooms stay usable, with dust sheeting and making good included where you need it.
Guide price from£770per opening inc VAT
- Postcodes
- EX16
- Population
- about 22,000
- Area
- Devon
- Pricing region
- South West
How do local ground conditions affect lintel replacement in Tiverton?
We cover Tiverton and its postcode districts EX16, part of Devon, with a population of roughly 22,000. Nearby, we also cover Exeter (12 miles), Taunton (19 miles) and Exmouth (20 miles).
Most of Devon is on firmer ground than the clay belts of the south-east. Old metal-mine shafts and workings are recorded in places, so mining searches are routine for some properties. Typical buildings in Devon: Cob and stone cottages, Victorian terraces in Exeter, Plymouth and Torbay, and post-war estates.
Lintel replacement prices in Tiverton
The ranges below reflect typical South West costs for lintel replacement, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Standard window or door opening | £770 – £2,600 | per opening |
| Wide or bay openingest. | £2,050 – £4,650 | per opening |
| Making good inside and outest. | £155 – £620 | per opening |
How we usually approach lintel replacement
Like-for-like replacement
The failed lintel comes out and one of suitable type and size is bedded on mortar with adequate bearing at each end. Bricks above are relaid to match the original bond and the joints are pointed to blend with the surrounding wall.
Best for: Standard windows and doors with a single failed lintel
Replacement with a cavity tray
A damp-proof membrane is laid over the new lintel with stop ends and weep holes, so water running down the cavity is directed out rather than into the house. Many older lintels were installed without one, which is often why they failed.
Best for: Cavity walls with damp above windows
What happens during lintel replacement, step by step?
Inspect the opening
We look at the crack pattern, the type of lintel and what sits above it. Pictures of both faces of the window, plus any visible lintel edge, help us judge it before visiting.
Specify the replacement
We confirm the lintel type, length and bearing needed. For wide openings, bays or walls with unusual loads, an engineer may specify it, and where the repair needs an engineer’s design or sign-off we can arrange one.
Remove and replace
Brickwork is carefully taken out above the lintel, the old lintel removed and the new one bedded level on full bearings. A cavity tray goes in where relevant, then the brickwork above is relaid.
What to look for before calling about lintel replacement
- Damp patches on the inside wall just above a window
- Soft, crumbly timber visible behind the brick face over a bay
- A diagonal crack climbing away from a window head
Rules for lintel replacement in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Questions about lintel replacement in Tiverton
How much should I budget for lintel replacement in Tiverton?
Guide prices for lintel replacement in Tiverton start from about £770 per opening, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Can you survey a property in Tiverton?
Yes, Tiverton is covered, along with postcode districts EX16. We also cover nearby Exeter and Taunton.
Why do houses in Devon crack?
Devon's ground is mostly older mudstones, sandstones and granite, so shrinkable-clay subsidence is less widespread than further east. Older solid-walled and cob buildings, steep sites and retaining walls are the more common structural concerns. Only an investigation can say why a particular building has moved.
Can a lintel be replaced without removing the window?
Often yes. With the wall propped or needled, the old lintel can usually be cut out above the frame. If the frame has been carrying load or the lintel sits tight on it, the window may need removing and refitting, which we include in the quote.
What does needling a wall mean?
Needling means passing short steel members through holes cut in the wall just above the opening and supporting them on props on both sides. The needles take the weight of the wall above, so the old lintel can be removed safely without any brickwork dropping.
Related work in Tiverton
Lintel replacement near Tiverton
Our quote tool shows guide prices for a Tiverton lintel replacement; add photos and we can confirm the likely opening size and type.