Irvine · Ayrshire
Lintel replacement in Irvine
Bay windows on older houses around Irvine often hide a timber lintel behind the face brickwork. When that timber rots, the bay brickwork drops and cracks, and replacing it properly means supporting the wall above throughout the job.
Guide price from£710per opening inc VAT
- Postcodes
- KA11, KA12
- Population
- about 34,000
- Area
- Ayrshire
- Pricing region
- Scotland
Is Ayrshire prone to ground movement?
With roughly 34,000 people, Irvine spans postcode districts KA11, KA12 in Ayrshire. Neighbouring towns we cover: Kilwinning (3 miles), Saltcoats (5 miles) and Troon (5 miles).
Clay shrinkage is less of a concern in Ayrshire, so other causes such as drains, poor footings or older walls are checked first. Historic coal workings are recorded beneath parts of Ayrshire, and a coal mining search is worth checking where movement is unexplained. Housing stock in Ayrshire: Sandstone villas and terraces in the coastal towns, miners' rows and post-war estates.
How we usually approach lintel replacement
Inner and outer lintel replacement
Solid walls and some cavity walls carry separate lintels on the inside and outside faces. Where both have failed, each is replaced in turn, keeping the wall supported throughout. Internal plaster and reveals are then made good and redecorated where included.
Best for: Older solid walls with rotten timber across the inner face
Propping and needling
Adjustable props carry the wall above while the old lintel comes out. For heavier walls, short steel needles are passed through holes cut above the opening and propped on both sides, taking the load off the lintel completely. The supports stay until the new work has set.
Best for: Openings with heavy walls, upper floors or bay windows above
What happens during lintel replacement, step by step?
Support the wall
Props or needles are set so the brickwork above carries no load on the old lintel. Windows are protected or temporarily removed where the work demands it, and the room inside is sheeted against dust.
Remove and replace
Brickwork is carefully taken out above the lintel, the old lintel removed and the new one bedded level on full bearings. A cavity tray goes in where relevant, then the brickwork above is relaid.
Remove supports and make good
Once the mortar has gained strength, props and needles come out and their holes are made good. Pointing, reveals and plaster are finished, and the window is refitted or checked for smooth operation.
What to look for before calling about lintel replacement
- Damp patches on the inside wall just above a window
- Brickwork above an opening visibly dipping in the middle
- Soft, crumbly timber visible behind the brick face over a bay
Lintel replacement prices in Irvine
The ranges below reflect typical Scotland costs for lintel replacement, including VAT. Scaffold, access and making good can push a job to the top of the range.
| Item | Guide price | Per |
|---|---|---|
| Standard window or door opening | £710 – £2,400 | per opening |
| Wide or bay openingest. | £1,900 – £4,300 | per opening |
| Making good inside and outest. | £140 – £570 | per opening |
Rules for lintel replacement in Scotland
In Scotland, underpinning and other structural alterations generally need a building warrant from the council’s building standards service before work starts, and a completion certificate at the end; small like-for-like repairs often do not. There is no Party Wall Act in Scotland; shared walls are covered by title deeds and, for flats, the Tenements (Scotland) Act 2004.
Questions about lintel replacement in Irvine
What is the price of lintel replacement in Irvine?
Guide prices for lintel replacement in Irvine start from about £710 per opening, including VAT, on Scotland rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you carry out lintel replacement in Irvine?
Yes. We take enquiries from across Irvine, including KA11, KA12, and from nearby places such as Kilwinning and Saltcoats. Send photos for a free initial view and we will tell you what happens next.
Does the ground around Irvine cause cracking?
Ayrshire has a large coalfield, especially in the east around Kilmarnock and Cumnock, with recorded workings, and raised-beach sands and gravels along the coast. Only an investigation can say why a particular building has moved.
What is a cavity tray and do I need one?
A cavity tray is a damp-proof membrane above a lintel that catches water running down inside a cavity wall and sends it out through weep holes. If your wall is cavity construction and the original lintel had no tray, fitting one with the new lintel is usually sensible.
Do I need building regulations approval to replace a lintel?
In England and Wales, replacing a lintel is structural work and building control will usually need to approve it. Rules differ in Scotland and Northern Ireland. We deal with building control where the work needs it, and include the cost in the quote.
More repairs we carry out in Irvine
- Subsidence insurance claim repairs
- Chimney stack repairs
- Structural crack repairs
- Wall tie replacement
- Floor joist repairs
Lintel replacement near Irvine
Have several failed lintels on one Irvine property? We will price each opening individually so you can plan the work in stages.