Bridgend · Mid Glamorgan
Crack stitching in Bridgend
Stitched repairs suit most brick and block walls in Bridgend, from older solid nine-inch walls to modern cavity construction. On soft historic brick we use lime mortar and grout chosen to suit it, so the repair does not damage the wall.
Guide price from£75per metre of crack inc VAT
- Postcodes
- CF31, CF35
- Population
- about 50,000
- Area
- Mid Glamorgan
- Pricing region
- Wales
Why does the ground in Mid Glamorgan matter for crack stitching?
Bridgend (CF31, CF35) has around 50,000 residents and sits in Mid Glamorgan. Nearby, we also cover Porthcawl (6 miles), Llantwit Major (8 miles) and Maesteg (8 miles).
Parts of Mid Glamorgan have clay that can shrink near trees in dry spells. Historic coal workings are recorded beneath parts of Mid Glamorgan, and a coal mining search is worth checking where movement is unexplained. Typical buildings in Mid Glamorgan: Long stone and brick terraces on valley sides, Victorian houses in Bridgend and post-war estates.
What should you budget for crack stitching in Bridgend?
For Bridgend we use Wales rates. Treat the table as a budget guide, inc VAT; the price you pay is the one on your written quote.
| Item | Guide price | Per |
|---|---|---|
| Crack stitching with stainless helical bars | £75 – £165 | per metre of crack |
| Small jobs (minimum visit)est. | £320 – £460 | per visit |
| Repointing over the stitched line in matching mortarest. | £30 – £55 | per metre |
Repair options we may recommend
Helical bars in cementitious grout
The most common approach. A slot is cut along the bed joint with a twin-blade cutter, flushed out and part filled with a cement-based grout. The helical bar is pushed in, more grout is packed over it, and the joint is pointed to match. The grout cures over a few days.
Best for: Most brick and block walls, including older softer bricks
Helical bars in resin grout
A resin grout bonds quickly and strongly to the bar and masonry and suits wet conditions or work that must take load sooner. It is less forgiving of soft or crumbly bricks, so the choice of grout is made wall by wall rather than as a rule.
Best for: Dense bricks, damp walls and repairs needing a fast cure
What to expect when we carry out crack stitching
Confirm the cause has stopped
Before quoting we check what made the wall crack and whether it is still moving. If there is doubt, we suggest a period of monitoring or an engineer’s view, rather than stitching a crack that will simply open again.
Set out the bars
Bar positions are marked across the crack, typically every few courses up its full height, with each bar extending well into sound brickwork on both sides. An engineer’s specification, where there is one, sets the exact spacing and length.
Repoint to match
The cut joints and crack are pointed in a mortar chosen to match the colour, texture and strength of the existing work. On older houses with soft bricks, a lime mortar is used so the repair does not trap moisture.
Is it time for crack stitching? Common signs
- A crack visible on both the inside and outside face of the wall
- A crack you can fit a coin into, running through bricks and mortar
- Filled cracks that keep reopening along the same line
Rules for crack stitching in Wales
In Wales, small like-for-like repairs do not usually need approval, but work that alters or strengthens the structure needs building control under the Welsh Building Regulations, and the Party Wall etc. Act 1996 can apply to shared walls.
Your crack stitching questions
What is the price of crack stitching in Bridgend?
Guide prices for crack stitching in Bridgend start from about £75 per metre of crack, including VAT, on Wales rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you carry out crack stitching in Bridgend?
Yes, Bridgend is covered, along with postcode districts CF31, CF35. We also cover nearby Porthcawl and Llantwit Major.
Does the ground around Bridgend cause cracking?
Mid Glamorgan lies on the South Wales coalfield, with dense historic workings, spoil tips and steep valley sides. Landslip, retaining walls and mining legacy are all live issues in the valleys. Only an investigation can say why a particular building has moved.
How far apart are helical bars placed?
Helical bars are usually placed every few courses up the full height of the crack, each one running well past the crack into sound brickwork. Spacing and bar length depend on the wall and the crack width, and where an engineer has specified the repair, their drawing sets them.
How long does crack stitching last?
Stainless steel bars do not rust, so a stitched repair in a stable wall should last as long as the surrounding brickwork. The repair only fails early when the wall keeps moving, which is why the cause is dealt with before the bars go in.
More repairs we carry out in Bridgend
- Extension pulling away repairs
- Chimney stack repairs
- Lintel replacement
- Bowing wall repairs
- Mining subsidence repairs
Crack stitching near Bridgend
Get a fixed price in writing for crack stitching in Bridgend once the repair is specified, with internal making good shown as a separate line.