Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Market Harborough · Leicestershire

Crack stitching in Market Harborough

Got a crack you can slip a coin into? In Market Harborough, as anywhere, that is usually wide enough to justify stitching rather than filling, provided an engineer or surveyor agrees the wall has stopped moving.

Guide price from£80per metre of crack inc VAT

Close-up of stainless helical bars set into raked-out mortar joints across a crack
Postcodes
LE16
Population
about 25,000
Area
Leicestershire
Pricing region
East Midlands

How do local ground conditions affect crack stitching in Market Harborough?

Market Harborough (LE16) has around 25,000 residents and sits in Leicestershire. Neighbouring towns we cover: Corby (10 miles), Kettering (10 miles) and Wigston (10 miles).

Clay soils are found in parts of Leicestershire. Parts of Leicestershire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Across Leicestershire, most homes are Victorian terraces in Leicester and Loughborough, inter-war semis and large post-war estates.

Guide prices for crack stitching in Market Harborough

These are guide prices for Market Harborough, using East Midlands rates and including VAT. Your written quote follows photos or a survey, and is fixed once the repair is specified.

Guide prices inc VAT on East Midlands rates. Items marked est. are our estimates.
ItemGuide pricePer
Crack stitching with stainless helical bars£80 – £175per metre of crack
Small jobs (minimum visit)est.£345 – £490per visit
Repointing over the stitched line in matching mortarest.£30 – £60per metre

Methods for crack stitching

Helical bars in resin grout

A resin grout bonds quickly and strongly to the bar and masonry and suits wet conditions or work that must take load sooner. It is less forgiving of soft or crumbly bricks, so the choice of grout is made wall by wall rather than as a rule.

Best for: Dense bricks, damp walls and repairs needing a fast cure

Helical bars in cementitious grout

The most common approach. A slot is cut along the bed joint with a twin-blade cutter, flushed out and part filled with a cement-based grout. The helical bar is pushed in, more grout is packed over it, and the joint is pointed to match. The grout cures over a few days.

Best for: Most brick and block walls, including older softer bricks

From first photo to finished repair

  1. Set out the bars

    Bar positions are marked across the crack, typically every few courses up its full height, with each bar extending well into sound brickwork on both sides. An engineer’s specification, where there is one, sets the exact spacing and length.

  2. Repoint to match

    The cut joints and crack are pointed in a mortar chosen to match the colour, texture and strength of the existing work. On older houses with soft bricks, a lime mortar is used so the repair does not trap moisture.

  3. Make good and record

    Internal plaster cracks are cut out and filled where included, and dust is cleared. You receive a short note of where the bars went, which is useful for future buyers, surveyors and any insurance file.

Symptoms that point to crack stitching

  • A crack visible on both the inside and outside face of the wall
  • Filled cracks that keep reopening along the same line
  • A crack you can fit a coin into, running through bricks and mortar

Rules for crack stitching in England

Like-for-like repairs such as crack stitching and repointing do not usually need building control approval in England, but anything that changes or strengthens the structure, such as underpinning or rebuilding a wall, does. If the work touches a party wall, the Party Wall etc. Act 1996 may apply.

Frequently asked questions

How much should I budget for crack stitching in Market Harborough?

Guide prices for crack stitching in Market Harborough start from about £80 per metre of crack, including VAT, on East Midlands rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Can you survey a property in Market Harborough?

Yes. We take enquiries from across Market Harborough, including LE16, and from nearby places such as Corby and Kettering. Send photos for a free initial view and we will tell you what happens next.

Why do houses in Leicestershire crack?

Leicestershire has Mercia Mudstone, Lias clay and glacial till across much of the county, with the Coalville and Swadlincote coalfield in the north-west. Clay soils near large trees can move with the seasons. Only an investigation can say why a particular building has moved.

Will crack stitching be visible afterwards?

Usually only slightly, because the bars sit inside the mortar joints and are pointed over. The main giveaway is the colour of new mortar, which can take a few months to weather. Careful mortar matching keeps the line discreet, especially on older brickwork.

Can crack stitching be done from outside only?

Often yes, especially on cavity walls where only the outer leaf has cracked. On solid walls, or where the crack shows clearly inside, bars may be needed on both faces to reconnect the full thickness. We check both sides before quoting.

Related work in Market Harborough

Crack stitching near Market Harborough

Try our online quote tool for a stitching guide price in Market Harborough, or send photos and we will check whether stitching is the right repair at all.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote