Keynsham · Somerset
Chimney stack repairs in Keynsham
Damp on a chimney breast in a Keynsham home often starts at the top of the stack, where cracked flaunching or failed pointing lets rain in. Fixing the stack and capping unused flues usually stops it at the source.
Guide price from£515per stack inc VAT
- Postcodes
- BS31
- Population
- about 20,000
- Area
- Somerset
- Pricing region
- South West
Is Somerset prone to ground movement?
We cover Keynsham and its postcode districts BS31, part of Somerset, with a population of roughly 20,000. If you are just outside Keynsham, we also cover Kingswood (3 miles), Bath (6 miles) and Yate (9 miles).
Parts of Somerset have clay that can shrink near trees in dry spells. Parts of Somerset lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Typical buildings in Somerset: Bath stone Georgian terraces, Victorian houses in Taunton and Weston-super-Mare, and post-war estates.
Chimney stack repairs prices in Keynsham
These are guide prices for Keynsham, using South West rates and including VAT. Your written quote follows photos or a survey, and is fixed once the repair is specified.
| Item | Guide price | Per |
|---|---|---|
| Repointing, flaunching and minor brick repairs | £515 – £2,050 | per stack |
| Partial or full stack rebuild | £3,100 – £10,300 | per stack |
| Stack restraint or strappingest. | £410 – £1,250 | per stack |
How we usually approach chimney stack repairs
Stack restraint or strapping
A stack that has leaned slightly but is otherwise sound can be restrained with stainless straps or ties fixed back to the roof structure or the gable. This stops further movement without taking the stack down, and is often combined with repointing.
Best for: Slightly leaning stacks with sound brickwork
Repointing and brick repairs
Eroded joints are raked out and repointed in a mortar suited to the brick, often a lime-based mix on older stacks. Spalled or cracked bricks are cut out and replaced with matched reclaimed or new bricks. On many stacks this, with new flaunching, is all that is needed.
Best for: Upright stacks with weathered joints and some damaged bricks
What happens during chimney stack repairs, step by step?
Look from the ground
Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.
Scaffold to the stack
Safe access is set up with a working platform around the stack. On terraces we may need to agree access over a neighbour’s roof, and a council licence is arranged where the scaffold stands on the pavement.
Weatherproof and clear
Caps or cowls are fitted where agreed, the roof around the stack is checked for slipped tiles, and debris is cleared from gutters. You receive photos of the finished stack taken from the scaffold, since it is hard to see from the ground.
What to look for before calling about chimney stack repairs
- Bits of brick, mortar or render landing in the garden or gutter
- Damp patches on the chimney breast inside, especially after rain
- Chimney pots that are loose, tilted or cracked at the base
Rules for chimney stack repairs in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Questions about chimney stack repairs in Keynsham
How much will chimney stack repairs cost in Keynsham?
Guide prices for chimney stack repairs in Keynsham start from about £515 per stack, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Do you cover Keynsham?
Yes. We take enquiries from across Keynsham, including BS31, and from nearby places such as Kingswood and Bath. Send photos for a free initial view and we will tell you what happens next.
Is the ground in Somerset prone to subsidence?
Somerset mixes Lias clays, Mercia Mudstone, limestone hills and the peat and alluvium of the Levels around Bridgwater, which can settle. The former Somerset coalfield around Radstock and Midsomer Norton left recorded workings. Only an investigation can say why a particular building has moved.
What is chimney flaunching?
Flaunching is the sloped bed of mortar on top of a chimney stack that holds the pots in place and throws rainwater off. When it cracks, water gets into the stack and pots can work loose. Renewing it is one of the most common stack repairs.
Can a leaning stack be straightened?
Not by pushing it back, because the brickwork would crack. A slight lean on a sound stack can be restrained so it moves no further. A pronounced lean is fixed by taking the stack down to sound masonry and rebuilding it plumb.
Other structural repairs in Keynsham
- Roof structure repairs
- Lintel replacement
- Mining subsidence repairs
- Concrete repairs
- Bay window subsidence repairs
Chimney stack repairs near Keynsham
Each part of a Keynsham chimney job, scaffold included, is itemised in our no-obligation written quote so you can see where the cost lies.