Telford · Shropshire
Chimney stack repairs in Telford
Before repairing a stack at a Telford property, we ask what lies beneath it. If a chimney breast has been removed inside, the support for the stack above needs checking by an engineer before any work on the roof.
Guide price from£500per stack inc VAT
- Postcodes
- TF4
- Population
- about 160,000
- Area
- Shropshire
- Pricing region
- West Midlands
What is the ground like in Shropshire?
We cover Telford and its postcode districts TF4, part of Shropshire, with a population of roughly 160,000. Nearby places we cover include Shrewsbury (13 miles), Wolverhampton (15 miles) and Stafford (17 miles).
Shropshire has a mix of ground, with clay in some places and firmer rock in others. Parts of Shropshire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Typical buildings in Shropshire: Timber-framed and brick town houses, industrial terraces around Telford, and new-town estates.
Guide prices for chimney stack repairs in Telford
These are guide prices for Telford, using West Midlands rates and including VAT. Your written quote follows photos or a survey, and is fixed once the repair is specified.
| Item | Guide price | Per |
|---|---|---|
| Repointing, flaunching and minor brick repairs | £500 – £2,000 | per stack |
| Partial or full stack rebuild | £3,000 – £10,000 | per stack |
| Stack restraint or strappingest. | £400 – £1,200 | per stack |
Methods for chimney stack repairs
Flaunching and pot resetting
Old cracked flaunching is broken out, pots are lifted and reset or replaced, and new flaunching is formed to a fall so water runs off. Unused flues can be capped with ventilated caps, which keeps rain out while letting the flue breathe.
Best for: Loose pots and cracked mortar at the top of the stack
Stack restraint or strapping
A stack that has leaned slightly but is otherwise sound can be restrained with stainless straps or ties fixed back to the roof structure or the gable. This stops further movement without taking the stack down, and is often combined with repointing.
Best for: Slightly leaning stacks with sound brickwork
From first photo to finished repair
Look from the ground
Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.
Scaffold to the stack
Safe access is set up with a working platform around the stack. On terraces we may need to agree access over a neighbour’s roof, and a council licence is arranged where the scaffold stands on the pavement.
Weatherproof and clear
Caps or cowls are fitted where agreed, the roof around the stack is checked for slipped tiles, and debris is cleared from gutters. You receive photos of the finished stack taken from the scaffold, since it is hard to see from the ground.
Symptoms that point to chimney stack repairs
- Mortar washed out of joints, leaving bricks standing proud
- Bits of brick, mortar or render landing in the garden or gutter
- Damp patches on the chimney breast inside, especially after rain
Rules for chimney stack repairs in England
In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.
Frequently asked questions
How much should I budget for chimney stack repairs in Telford?
Guide prices for chimney stack repairs in Telford start from about £500 per stack, including VAT, on West Midlands rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.
Can you survey a property in Telford?
We do. Telford and the surrounding area are covered, including nearby Shrewsbury and Wolverhampton. A free initial assessment from your photos is the first step.
Why do houses in Shropshire crack?
Shropshire has very varied rock, from Mercia Mudstone on the north Shropshire plain to the Coalbrookdale coalfield under Telford, where historic shallow coal, clay and ironstone workings are widespread. Only an investigation can say why a particular building has moved.
Is a leaning chimney dangerous?
A leaning chimney can become dangerous, because stacks are heavy and stand high above the roof. A slight, long-standing lean may be stable for now, but a lean that is worsening, or loose bricks and pots, should be looked at quickly. Keep people away from below if anything looks loose.
Can a leaning stack be straightened?
Not by pushing it back, because the brickwork would crack. A slight lean on a sound stack can be restrained so it moves no further. A pronounced lean is fixed by taking the stack down to sound masonry and rebuilding it plumb.
Related work in Telford
Chimney stack repairs near Telford
If a stack in Telford has shed bricks or a pot, photograph it from a safe place and send it over so we can advise on next steps.