Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Bedlington · Northumberland

Chimney stack repairs in Bedlington

Before repairing a stack at a Bedlington property, we ask what lies beneath it. If a chimney breast has been removed inside, the support for the stack above needs checking by an engineer before any work on the roof.

Guide price from£460per stack inc VAT

Brick chimney stack being rebuilt with new flaunching on a slate roof
Postcodes
NE22, NE24, NE62
Population
about 18,000
Area
Northumberland
Pricing region
North East

What is the ground like in Northumberland?

We cover Bedlington and its postcode districts NE22, NE24, NE62, part of Northumberland, with a population of roughly 18,000. Nearby places we cover include Cramlington (3 miles), Blyth (3 miles) and Ashington (3 miles).

Clay soils are found in parts of Northumberland. Parts of Northumberland lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Housing stock in Northumberland: Colliery terraces, stone farmhouses and villages, and post-war estates.

Chimney stack repairs prices in Bedlington

For Bedlington we use North East rates. Treat the table as a budget guide, inc VAT; the price you pay is the one on your written quote.

Guide prices inc VAT on North East rates. Items marked est. are our estimates.
ItemGuide pricePer
Repointing, flaunching and minor brick repairs£460 – £1,850per stack
Partial or full stack rebuild£2,750 – £9,200per stack
Stack restraint or strappingest.£370 – £1,100per stack

How we usually approach chimney stack repairs

Partial or full rebuild

Where the lean is pronounced or the brickwork is badly decayed, the stack is taken down to sound masonry, often to roof level, and rebuilt plumb with new flashings and flaunching. Original bricks are cleaned and reused where possible to keep the appearance.

Best for: Badly leaning or decayed stacks

Repointing and brick repairs

Eroded joints are raked out and repointed in a mortar suited to the brick, often a lime-based mix on older stacks. Spalled or cracked bricks are cut out and replaced with matched reclaimed or new bricks. On many stacks this, with new flaunching, is all that is needed.

Best for: Upright stacks with weathered joints and some damaged bricks

What happens during chimney stack repairs, step by step?

  1. Scaffold to the stack

    Safe access is set up with a working platform around the stack. On terraces we may need to agree access over a neighbour’s roof, and a council licence is arranged where the scaffold stands on the pavement.

  2. Repair, restrain or rebuild

    The agreed work is carried out: repointing, new flaunching and pots, restraint, or taking the stack down and rebuilding it. Lead flashings where the stack meets the roof are checked and renewed if needed.

  3. Weatherproof and clear

    Caps or cowls are fitted where agreed, the roof around the stack is checked for slipped tiles, and debris is cleared from gutters. You receive photos of the finished stack taken from the scaffold, since it is hard to see from the ground.

What to look for before calling about chimney stack repairs

  • Chimney pots that are loose, tilted or cracked at the base
  • A stack visibly leaning when you look along the roof ridge
  • Mortar washed out of joints, leaving bricks standing proud

Rules for chimney stack repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Questions about chimney stack repairs in Bedlington

How much should I budget for chimney stack repairs in Bedlington?

Guide prices for chimney stack repairs in Bedlington start from about £460 per stack, including VAT, on North East rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Can you survey a property in Bedlington?

Yes. We take enquiries from across Bedlington, including NE22, NE24, NE62, and from nearby places such as Cramlington and Blyth. Send photos for a free initial view and we will tell you what happens next.

Why do houses in Northumberland crack?

South-east Northumberland around Blyth, Ashington and Cramlington lies on the Northumberland coalfield, worked extensively in the past, under a cover of glacial clay. The north and west are hard rock and moorland. Only an investigation can say why a particular building has moved.

What if a chimney breast below has been removed?

Where the breast has gone but the stack is still on the roof, how that stack is now held up is a structural question. Cracking in nearby ceilings or a dropped stack are warning signs. An independent chartered structural engineer should assess it before any repair, and we can arrange one.

Can a leaning stack be straightened?

Not by pushing it back, because the brickwork would crack. A slight lean on a sound stack can be restrained so it moves no further. A pronounced lean is fixed by taking the stack down to sound masonry and rebuilding it plumb.

Related work in Bedlington

Chimney stack repairs near Bedlington

The quote tool gives guide prices for stack repointing, restraint and rebuilds in Bedlington; send photos to narrow down which you need.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote