Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Redcar · North Yorkshire

Chimney stack repairs in Redcar

Plenty can be judged about a Redcar chimney from the pavement. A lean, tilted pots or patchy pointing are often visible from the ground, and photos with a zoom tell us a lot before anyone goes up.

Guide price from£475per stack inc VAT

Brick chimney stack being rebuilt with new flaunching on a slate roof
Postcodes
TS6, TS10
Population
about 37,000
Area
North Yorkshire
Pricing region
Yorkshire and the Humber

Is North Yorkshire prone to ground movement?

We cover Redcar and its postcode districts TS6, TS10, part of North Yorkshire, with a population of roughly 37,000. Nearby, we also cover Guisborough (6 miles), Middlesbrough (8 miles) and Hartlepool (8 miles).

Clay soils are found in parts of North Yorkshire. Parts of North Yorkshire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. Typical buildings in North Yorkshire: Stone cottages, Georgian and Victorian houses in York and Harrogate, and brick terraces on Teesside.

How much will chimney stack repairs cost in Redcar?

The ranges below reflect typical Yorkshire and the Humber costs for chimney stack repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.

Guide prices inc VAT on Yorkshire and the Humber rates. Items marked est. are our estimates.
ItemGuide pricePer
Repointing, flaunching and minor brick repairs£475 – £1,900per stack
Partial or full stack rebuild£2,850 – £9,500per stack
Stack restraint or strappingest.£380 – £1,150per stack

Which repair method suits a home in Redcar?

Partial or full rebuild

Where the lean is pronounced or the brickwork is badly decayed, the stack is taken down to sound masonry, often to roof level, and rebuilt plumb with new flashings and flaunching. Original bricks are cleaned and reused where possible to keep the appearance.

Best for: Badly leaning or decayed stacks

Flaunching and pot resetting

Old cracked flaunching is broken out, pots are lifted and reset or replaced, and new flaunching is formed to a fall so water runs off. Unused flues can be capped with ventilated caps, which keeps rain out while letting the flue breathe.

Best for: Loose pots and cracked mortar at the top of the stack

What happens when we carry out chimney stack repairs in Redcar?

  1. Look from the ground

    Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.

  2. Check what is below

    We ask whether any chimney breasts have been removed, and check the loft and rooms below for cracking. If a breast has gone without proper support, we recommend an independent chartered structural engineer before any stack work.

  3. Scaffold to the stack

    Safe access is set up with a working platform around the stack. On terraces we may need to agree access over a neighbour’s roof, and a council licence is arranged where the scaffold stands on the pavement.

Signs you may need chimney stack repairs

  • Chimney pots that are loose, tilted or cracked at the base
  • Bits of brick, mortar or render landing in the garden or gutter
  • Damp patches on the chimney breast inside, especially after rain

Rules for chimney stack repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Chimney stack repairs in Redcar: questions and answers

How much will chimney stack repairs cost in Redcar?

Guide prices for chimney stack repairs in Redcar start from about £475 per stack, including VAT, on Yorkshire and the Humber rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you cover Redcar?

Yes. We take enquiries from across Redcar, including TS6, TS10, and from nearby places such as Guisborough and Middlesbrough. Send photos for a free initial view and we will tell you what happens next.

Is the ground in North Yorkshire prone to subsidence?

North Yorkshire ranges from limestone dales and moors to clays and glacial deposits in the Vale of York, with the Selby coalfield in the south and ironstone workings in Cleveland. Teesside has areas of soft and made ground. Only an investigation can say why a particular building has moved.

Should I remove my chimney stack instead of repairing it?

It depends on whether you use the flue, the stack’s condition and how it relates to the house next door. Taking a stack down below the roofline changes the structure and the roof, and on a terrace it can affect your neighbour. We can price both options.

What is chimney flaunching?

Flaunching is the sloped bed of mortar on top of a chimney stack that holds the pots in place and throws rainwater off. When it cracks, water gets into the stack and pots can work loose. Renewing it is one of the most common stack repairs.

Other structural repairs in Redcar

Chimney stack repairs near Redcar

Sharing a stack with next door in Redcar? We can quote for the whole stack so you and your neighbour can see the full picture.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote