Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Hammersmith and Fulham · Greater London

Chimney stack repairs in Hammersmith and Fulham

Damp on a chimney breast in a Hammersmith and Fulham home often starts at the top of the stack, where cracked flaunching or failed pointing lets rain in. Fixing the stack and capping unused flues usually stops it at the source.

Guide price from£625per stack inc VAT

Brick chimney stack being rebuilt with new flaunching on a slate roof
Postcodes
SW13, SW14, W3, W4, W6
Population
about 180,000
Area
Greater London
Pricing region
London

Why does the ground in Greater London matter for chimney stack repairs?

Hammersmith and Fulham is one of the 32 London boroughs, with around 180,000 residents in districts such as SW13, SW14, W3, W4, W6. Neighbouring towns we cover: Kensington and Chelsea (1 miles), Wandsworth (3 miles) and Westminster (4 miles).

Much of Greater London sits on clay that shrinks in dry summers and swells in wet winters. Ground movement here is more often linked to soils, drains and trees than to mining. Typical buildings in Greater London: Victorian and Edwardian terraces with shallow footings, inter-war semis in the outer boroughs, and converted flats and mansion blocks.

Guide prices for chimney stack repairs in Hammersmith and Fulham

The ranges below reflect typical London costs for chimney stack repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.

Guide prices inc VAT on London rates. Items marked est. are our estimates.
ItemGuide pricePer
Repointing, flaunching and minor brick repairs£625 – £2,500per stack
Partial or full stack rebuild£3,750 – £12,500per stack
Stack restraint or strappingest.£500 – £1,500per stack

Methods for chimney stack repairs

Flaunching and pot resetting

Old cracked flaunching is broken out, pots are lifted and reset or replaced, and new flaunching is formed to a fall so water runs off. Unused flues can be capped with ventilated caps, which keeps rain out while letting the flue breathe.

Best for: Loose pots and cracked mortar at the top of the stack

Partial or full rebuild

Where the lean is pronounced or the brickwork is badly decayed, the stack is taken down to sound masonry, often to roof level, and rebuilt plumb with new flashings and flaunching. Original bricks are cleaned and reused where possible to keep the appearance.

Best for: Badly leaning or decayed stacks

From first photo to finished repair

  1. Look from the ground

    Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.

  2. Check what is below

    We ask whether any chimney breasts have been removed, and check the loft and rooms below for cracking. If a breast has gone without proper support, we recommend an independent chartered structural engineer before any stack work.

  3. Scaffold to the stack

    Safe access is set up with a working platform around the stack. On terraces we may need to agree access over a neighbour’s roof, and a council licence is arranged where the scaffold stands on the pavement.

Symptoms that point to chimney stack repairs

  • Bits of brick, mortar or render landing in the garden or gutter
  • Mortar washed out of joints, leaving bricks standing proud
  • Chimney pots that are loose, tilted or cracked at the base

Rules for chimney stack repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Frequently asked questions

How much will chimney stack repairs cost in Hammersmith and Fulham?

Guide prices for chimney stack repairs in Hammersmith and Fulham start from about £625 per stack, including VAT, on London rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Do you cover Hammersmith and Fulham?

Yes. We take enquiries from across Hammersmith and Fulham, including SW13, SW14, W3, W4, and from nearby places such as Kensington and Chelsea and Wandsworth. Send photos for a free initial view and we will tell you what happens next.

Is the ground in Greater London prone to subsidence?

Most of Greater London sits on London Clay, among the most shrinkage-prone ground in the UK, with river gravels along the Thames. Subsidence claims here are among the most frequent in the country, especially after dry summers and near street and garden trees. Only an investigation can say why a particular building has moved.

What is chimney flaunching?

Flaunching is the sloped bed of mortar on top of a chimney stack that holds the pots in place and throws rainwater off. When it cracks, water gets into the stack and pots can work loose. Renewing it is one of the most common stack repairs.

Why is my chimney stack leaning?

Most leaning stacks are caused by sulphate attack, where chemicals from old flue gases make the mortar expand more on the wetter side, so the stack bends away from the weather. Frost damage and failed pointing can make it worse. A recently leaning stack can also signal problems below.

Other structural repairs in Hammersmith and Fulham

Chimney stack repairs near Hammersmith and Fulham

With the stack repair and scaffold plan agreed, your Hammersmith and Fulham chimney quote becomes a fixed price in writing, before anyone goes up.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote