Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Cirencester · Gloucestershire

Chimney stack repairs in Cirencester

Before repairing a stack at a Cirencester property, we ask what lies beneath it. If a chimney breast has been removed inside, the support for the stack above needs checking by an engineer before any work on the roof.

Guide price from£515per stack inc VAT

Brick chimney stack being rebuilt with new flaunching on a slate roof
Postcodes
GL7
Population
about 20,000
Area
Gloucestershire
Pricing region
South West

How do local ground conditions affect chimney stack repairs in Cirencester?

Postcode districts GL7 cover Cirencester, a Gloucestershire town of about 20,000 people. If you are just outside Cirencester, we also cover Stroud (10 miles), Cheltenham (13 miles) and Swindon (14 miles).

Parts of Gloucestershire have clay that can shrink near trees in dry spells. Parts of Gloucestershire lie on a former coalfield, so a coal mining search is worth checking if movement has no obvious cause. What you mostly find across Gloucestershire: Cotswold stone cottages, Regency terraces in Cheltenham, and brick estates around Gloucester.

Guide prices for chimney stack repairs in Cirencester

Guide prices below are for homes in Cirencester, on South West rates and including VAT. A survey or good photos let us turn them into a fixed written price.

Guide prices inc VAT on South West rates. Items marked est. are our estimates.
ItemGuide pricePer
Repointing, flaunching and minor brick repairs£515 – £2,050per stack
Partial or full stack rebuild£3,100 – £10,300per stack
Stack restraint or strappingest.£410 – £1,250per stack

Methods for chimney stack repairs

Partial or full rebuild

Where the lean is pronounced or the brickwork is badly decayed, the stack is taken down to sound masonry, often to roof level, and rebuilt plumb with new flashings and flaunching. Original bricks are cleaned and reused where possible to keep the appearance.

Best for: Badly leaning or decayed stacks

Repointing and brick repairs

Eroded joints are raked out and repointed in a mortar suited to the brick, often a lime-based mix on older stacks. Spalled or cracked bricks are cut out and replaced with matched reclaimed or new bricks. On many stacks this, with new flaunching, is all that is needed.

Best for: Upright stacks with weathered joints and some damaged bricks

From first photo to finished repair

  1. Look from the ground

    Photos from the street and garden, ideally with a zoom, show us the lean, the pots, the flaunching and the state of the pointing. Damp patches inside are worth photographing too, as they help trace the route water is taking.

  2. Repair, restrain or rebuild

    The agreed work is carried out: repointing, new flaunching and pots, restraint, or taking the stack down and rebuilding it. Lead flashings where the stack meets the roof are checked and renewed if needed.

  3. Weatherproof and clear

    Caps or cowls are fitted where agreed, the roof around the stack is checked for slipped tiles, and debris is cleared from gutters. You receive photos of the finished stack taken from the scaffold, since it is hard to see from the ground.

Symptoms that point to chimney stack repairs

  • Mortar washed out of joints, leaving bricks standing proud
  • Damp patches on the chimney breast inside, especially after rain
  • Bits of brick, mortar or render landing in the garden or gutter

Rules for chimney stack repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Frequently asked questions

How much should I budget for chimney stack repairs in Cirencester?

Guide prices for chimney stack repairs in Cirencester start from about £515 per stack, including VAT, on South West rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Can you survey a property in Cirencester?

We do. Cirencester and the surrounding area are covered, including nearby Stroud and Cheltenham. A free initial assessment from your photos is the first step.

Why do houses in Gloucestershire crack?

The Severn vale around Gloucester, Cheltenham and Tewkesbury is Lias and Mercia Mudstone clay, the Cotswolds are limestone, and the Forest of Dean has a historic coalfield. Parts of South Gloucestershire around Kingswood also lie on old Coal Measures. Only an investigation can say why a particular building has moved.

Should I remove my chimney stack instead of repairing it?

It depends on whether you use the flue, the stack’s condition and how it relates to the house next door. Taking a stack down below the roofline changes the structure and the roof, and on a terrace it can affect your neighbour. We can price both options.

Is a leaning chimney dangerous?

A leaning chimney can become dangerous, because stacks are heavy and stand high above the roof. A slight, long-standing lean may be stable for now, but a lean that is worsening, or loose bricks and pots, should be looked at quickly. Keep people away from below if anything looks loose.

Related work in Cirencester

Chimney stack repairs near Cirencester

With the stack repair and scaffold plan agreed, your Cirencester chimney quote becomes a fixed price in writing, before anyone goes up.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote