Structural repairs across England, Wales, mainland Scotland and Northern Ireland · Free initial assessment from your photos0800 088 6341

Ware · Hertfordshire

Bowing wall repairs in Ware

Sighting along a wall at your Ware home and seeing a curve can be unsettling. Send us photos with a level held against it, and we will explain what is likely holding it, or not, and what the repair involves.

Guide price from£1,050per wall inc VAT

Gable wall of an end-terrace with round restraint tie plates fixed through it
Postcodes
SG12
Population
about 18,000
Area
Hertfordshire
Pricing region
East of England

What should you know about the ground under Ware?

We cover Ware and its postcode districts SG12, part of Hertfordshire, with a population of roughly 18,000. Neighbouring towns we cover: Hertford (2 miles), Hoddesdon (3 miles) and Harlow (6 miles).

Much of Hertfordshire sits on clay that shrinks in dry summers and swells in wet winters. Ground movement here is more often linked to soils, drains and trees than to mining. Housing stock in Hertfordshire: Garden-city houses in Letchworth and Welwyn, 1930s semis, Victorian terraces and post-war new-town estates.

Guide prices for bowing wall repairs in Ware

The ranges below reflect typical East of England costs for bowing wall repairs, including VAT. Scaffold, access and making good can push a job to the top of the range.

Guide prices inc VAT on East of England rates. Items marked est. are our estimates.
ItemGuide pricePer
Lateral restraint for a typical gable£1,050 – £3,150per wall
Remedial restraint ties installed£25 – £65per tie
Partial rebuild of a badly distorted sectionest.£3,150 – £8,400per section

Methods for bowing wall repairs

Partial rebuild

A section that has bowed beyond safe limits, or where bricks have crushed, is propped, taken down and rebuilt plumb with restraint built in. It is the most disruptive option, so it is kept to the area that genuinely needs it.

Best for: Badly distorted sections that cannot be tied back

Stitching a delaminating wall

Where the layers of a solid wall have separated, long stainless ties are drilled in from the face and bonded into the inner layer to bind the wall together again. This is often combined with restraint ties, so the wall is both reconnected through its thickness and tied back to the structure.

Best for: Solid walls where the outer layer has pulled away

From first photo to finished repair

  1. Assess the bow

    We look at where the wall bows, how far it is out of plumb and how the floors and roof meet it. Photographs from your phone held flat against the wall often show the shape clearly before anyone visits.

  2. Fit the ties and straps

    Ties are drilled through and fixed, or straps fitted and secured, at the spacing specified. Any rebuild is carried out at this stage, with temporary propping in place until the new brickwork has gained strength.

  3. Close up and make good

    Boards are relaid, plaster and outside fixings made good, and cracked joints repointed. You receive a record of the restraint positions, which helps if you sell or if an engineer needs to check the wall again later.

Symptoms that point to bowing wall repairs

  • Gutters or the roof edge no longer lining up with the wall
  • Internal plaster cracks where a wall meets the ceiling
  • Gaps opening between floorboards and the skirting on an outside wall

Rules for bowing wall repairs in England

In England, underpinning and other work that alters or strengthens a wall or foundation is building work under the Building Regulations (Part A, structure), so building control approves and inspects it. Like-for-like repairs often are not, and we tell you which applies before a price is agreed. Work to a party wall, or excavation close to a neighbour’s foundations, can also need a notice under the Party Wall etc. Act 1996.

Frequently asked questions

How much should I budget for bowing wall repairs in Ware?

Guide prices for bowing wall repairs in Ware start from about £1,050 per wall, including VAT, on East of England rates. Your fixed written price follows photos or a survey and depends on the extent of the work and access.

Can you survey a property in Ware?

Yes, Ware is covered, along with postcode districts SG12. We also cover nearby Hertford and Hoddesdon.

Why do houses in Hertfordshire crack?

South Hertfordshire around Watford, Borehamwood and Potters Bar is London Clay, while the north and west are chalk with clay-with-flints and the east has boulder clay. The clay areas are prone to seasonal subsidence near trees. Only an investigation can say why a particular building has moved.

Does a bowing wall need an engineer?

Often it does, especially if the bow is large, growing or linked to removed internal walls or chimney breasts. Small, long-standing bows can sometimes be restrained to a standard detail. Where the repair needs an engineer’s design or sign-off, we can arrange an independent chartered structural engineer.

Is a bowing wall dangerous?

A bowing wall is not always dangerous, but it should never be ignored. Many have been slightly out of line for decades. A bow that is growing, crushing bricks or appeared after building work is more serious, and an engineer should look at it promptly. Your engineer will confirm.

Related work in Ware

Bowing wall repairs near Ware

Send photos of the bowing wall at your Ware property, including a level held against it, for a free initial assessment.

Next step

Send us photos of the crack or movement

A free initial assessment from your photos, then a no-obligation written quote. If an engineer, drain survey or monitoring is needed first, we say so before you spend anything.

CallGet a quote